Upgrade Kits


Scantech has been on the marked since 1989


Believe or not but there are several hundreds of Scantech 3D Scanners still running in MS-DOS or Windows 98! Our first CNC mounted 3D Scanners used ISA and later PCI plug-in card. The first generation OneCam 3D Scanner was plugged into a COM-port on the PC using RS232 protocol with a serious limitations in cable length – max 25 meter to PC. The first generation of our 3D Scanners was a “OneCam” type, meaning that it had only one camera to measure. We changed logo from “Wella” to the more modern Scantech that we use today.



Today all is running in the latest Windows version.  We changed to USB several years ago, so no internal card in the PC is necessary.  We changed to the robust industrial standard RS485 so we can have up to 100 meter cable to PC. We developed a “TwoCam” 3D Scanner with two digital cameras to improve accuracy and to avoid hidden areas in the scan. We still have a OneCam 3D Scanner but it’s up to date in all details and a low-budget alternative to the popular TwoCam 3D Scanner. New 3D Scanners mounts the same way as the old 3D Scanners with 4 M6 screws on the backside – no change.



For our old customers we have designed a number of upgrade kits, that secure your investment for many years ahead and gives you higher quality and faster scan.


Sk1

Upgrade kit from MS-DOS or Windows 98 to latest version OneCam 3D Scanner running Windows 7.

Kit include

  • OneCam 3D Scanner 200 mm range
  • Scanner cable up to 100 meter
  • USB Interface electronics
  • D-sub 25 connector to CNC machine
  • Power Supply
  • SmartScanX for Windows 7 (Output *.SRF)
  • 2 years warranty on hardware
  • Free online support

 Simple and easy

  • Plug in the D-sub 25 connector
  • Install SmartScanX software
  • Scan


Sk2

Upgrade kit from MS-DOS or Windows 98 to latest version TwoCam 3D Scanner running Windows 7.

Kit include

  • TwoCam 3D Scanner 200 or 400 mm range
  • Scanner cable up to 100 meter
  • USB Interface electronics
  • D-sub 25 connector to CNC machine
  • Power Supply
  • SmartScanX for Windows 7 (Output *.SRF)
  • 2 years warranty on hardware
  • Free online support

Simple and easy

  1. Plug in the D-sub 25 connector
  2. Install SmartScanX software
  3. Scan


Sk3

Upgrade kit from ISA- or PCI-card  to latest version USB Interface running Windows 7.

For customers that has a TwoCam 3D Scanner

Kit include

  • USB Interface electronics
  • USB cable to Scanner PC
  • D-sub 37 connector to CNC machine
  • SmartScanX for Windows 7 (Output *.SRF)
  • 2 years warranty on hardware
  • Free online support

Simple and easy

  1. Plug in the D-sub 37 pin connector
  2. Install SmartScanX software
  3. Scan


Contact us for other upgrade kits