Home 5 ENERGY 5 BATTERIES MEASUREMENTS 5 ANODE COATING LINES 2 SIDES – MEASUREMENTS

measurement solution FOR

ANODE COATING

double-SIDED battery coating lines

MEASUREMENT SYSTEM

5 SCANNERS USING
OUR ADVANCED SAMESPOT TECHNOLOGY

  • Scanner 1 for the foil substrate
  • Scanner 2 and 4 for each wet coating section
  • Scanner 3 and 5 for each dry coating section

3 VISUAL INSPECTION STATIONS

  • Surface inspection systems 1 and 2 for each wet coating section
  • Surface inspection system 3 before the winder

HMIs

3 SUPERVISION STATIONS WITH THE FLEXSCAN INTERFACE

  • 2 HMIs dedicated to the coating stations
  • 1 full-line HMI inside the control room
  • OPC-UA connection with the SCANTECH network

FEATURES

RECOMMENDED SCANNERS

SCANNERS: 1, 2 & 4

  • Type: O-Frame
  • Up to 1500mm for anodes and cathodes

SCANNERS: 3 & 5

  • Type : C-Frame if thickness is required

O-Frame if thickness is not required

MEASUREMENTS

FOIL BASIS WEIGHT MEASUREMENT

  • Range: 1 to 1000g/m2

  • Technology: low-energy x-ray transmission sensor

  • Accuracy: Better than 0.1%

WET OR DRY BASIS WEIGHT MEASUREMENT

  • Range: 1 to 500g/m2
  • Technology: auto-calibration x-ray sensor
  • Edge detection resolution: ≈ 0.5mm
  • Accuracy: Better than 0.1%
  • Absolute weight measurement without calibration: better than 1%
  • “Bunny ears“ profile visualization

ADDITIONAL

DRY THICKNESS MEASUREMENT

  • Range: 1 to 3000μm
  • Technology: confocal sensor

OPTIONAL

DRY DENSITY MEASUREMENT

  • Type: C-Frame

  • Technology: confocal + basis weight

VISUAL INSPECTION

DEFECT DETECTION

  • CD resolution: <100μm
  • MD resolution: <100μm
  • Defect classification

GEOMETRY MEASUREMENT

  • Geometric figure control, including double-sided overlapping patterns and ceramic coating
  • Patterns and stripes
  • Accuracy: Better than 0.1μm

TRACEABILITY

  • Data Matrix Code (DMC) interpretation

Receive a baseline laboratory measurement report for your product

Learn more about
our technology

Contact our sales team

COMPACT DESIGN

LV3 SCANNER

RECOMMENDED SCANNER

COMPACT DESIGN

HC3 C-FRAME SCANNER

RECOMMENDED SCANNER

Graphical representation of both substrate and coating lanes.
Interactive profiles and trends of single and multi-strip production.

SYNCHRONIZED SCANNERS

To accurately calculate changes to a modified product using multiple scanners,
we developed our patented “SAME SPOT” measurement solution.
All scanners follow the same trajectory and measure the same spot on the product as it continues down the line.

The TREX application is dedicated to browsing past and current production reports. Our unique tagging system allows archived reports to be retrieved, sorted, categorized, and collated.

Gather all the reports for a given customer during the last few years, or find all the reports for productions that use a given recipe.

Customize tags to fit your needs and the possibilities are virtually infinite!

Receive a baseline laboratory measurement report for your product

Learn more about
our technology

Contact our sales team